Post pics of a ZJ with a 3.5" IRO lift with 31 or 32" tires here!! - Page 7

coolio365 · 03-12-2009, 06:00 PM

i got all 4 shocks, 4 lower fixed Control arms, 4 Springs, Rear Track bar Bracket, black craiger 15x8 rims only 5k miles on them 33x12.50xR15 bfg mud terrains (30% tread) for 200 bucks and Yes the lift was used but only had 5k miles on the lift and rims. Have the Les shwabs receipt for the lift install and rims i took the lift rims and tires off the jeep that was wrecked so i know the receipt is valid :-)

scarthearmada6 · 03-12-2009, 08:08 PM

nice. good call i got my steel bumper at the junkyard. tomken 630$ bumper i paid 46. im going and getting fixed rear lower arms sometime this week off the same jeep for 32 bucks. i put my lift on myself though. only 6 hours with hand tools on the ground. not to bad. compressing the springs is what took the longest. i dont let other people work on my jeep except fellow jeepers. i dont trust anyone over myself. ive maintained mine since we bought it in 02 and have yet to have a problem except replacing the trans. (knock on wood) but thats cause chrysler trans' suck. 200 used is a steal but i still like having all new parts if i can. i mean the bumper was basically new no rust no nicks no chips and it was a steal but you did really good.

coolio365 · 03-12-2009, 09:49 PM

no i put the lift rims and tires on my jeep myself. the jeep that was wrecked had it installed at les shwabs thats how i know the lift and rims truely did have 5k on them. i will never let anyone touch my jeep besides me unless its a simply alignment or tire mount and balance i do all my own work

melloyello · 03-13-2009, 05:09 AM

Where are all the pictures? Lot of fluff in this thread.

scarthearmada6 · 03-13-2009, 09:32 AM

i do my own tires and i try to do my alignments if its not to far off :-D yeah where are all the pics.

coolio365 · 03-13-2009, 10:13 AM

stock

To now

melloyello · 03-25-2009, 07:13 PM

Here's another one. 3.5" w/ 31x10.50-15 treadwrights

jlschneider · 03-25-2009, 07:24 PM

The pic doesnt do the truck justice. IRO 3.5" Rustys front discos, Black diamond shocks, and 32x10.5 tsl radials. The KOR support is en route. And yes it rubs like crazy even with minor bumper trimming, so the solution is removing the bumper!

**Texas ZJ1** · 03-26-2009, 12:05 PM

There are lots of pics in the Lifted ZJs thread. Start there. Making new threads for each different lift and tire combo doesn't work that well.

Hunter