OK so heres my problem. As per tradition I would like to fly a full size flag on the back of my jeep for Independence Day. the problem is i cant figure out what would be the best way, this is my first WJ and all years before ive had a CJ or a TJ that i could just lash the flag to the rear bumper or roll bar. Any Ideas???
I am not one to be changing lanes at 70 mph on a lifted truck on 33's, but since I am in Miami, I have to be prepared for the continuous influx of new drivers whose previous ride was a bicycle with wooden wheels.
thanks jeepheller but i dont have a sunroof either
i got up early this mornin, and with a little help from a friend of mine, we got the flag up. i used a 2 foot length of pvc i had layin around and some galvinized pipe strapping. mounted the strapping to the two tail light screws and and put the pvc thru them held in place by a couple of short self tapping screws. threaded a large bolt thru one side as a set screw to hold the flag in. works pretty darn good, just went to drop of my daughter at camp and it held strong. only problem is i cant open my liftgate anymore, back glass still opens tho.