[rolltide99]

My 97 Laredo's remote key fobs stopped working and I wanted to know if there's a way to reset them to work again. I've replaced the batteries but I don't think it was that since both remotes stopped at the same time. I'm getting tired (as well as my neighbors) of having to go to the passenger side and lock & unlock to turn the alarm off and now the jeeps stalling out when starting it like the anti theft is killing the engine. Anyone know what/s causing this and how to get them working again?

[davigzj]

To program the remote keyless entry (RKE) Transmitter access codes into the RKE receiver in the passenger door module requires the use of a DBR scan tool. Refer to proper Body Diagnostic Procedures manual for more information.

[ZeeJay1997]

Originally Posted by rolltide99

I'm getting tired (as well as my neighbors) of having to go to the passenger side and lock & unlock to turn the alarm off and now the jeeps stalling out when starting it like the anti theft is killing the engine.

I lost my fobs several months ago. Don't use the door lock buttons to lock it and you won't turn the alarm on.

[squazz]

have you tried replacing the batteries? I replaced them in mine (were dead when PO gave it to me) and it was still programed

[rolltide99]

Replaced batteries in both fobs...still nothin!

[ratmonkey]

going to be a trip to the dealer unfortunately. no way to do it on your own.

[rolltide99]

Dealer charged $87 to reprogram both fobs

[squazz]

Originally Posted by rolltide99

Dealer charged $87 to reprogram both fobs

here they charge: 45$ for 1 or 2

[ratmonkey]

half hour labor for any number is what they should be charging.