Heep got a present

**tsconver** · 03-17-2009, 08:05 PM

Just got this and installed it tonight.

spare parts

gatorayde · 03-17-2009, 08:43 PM

No TC yolk swap? No vibes either? Mine had vibes for a while until I re-installed it (had it out for a few weeks, was bad winter so I put it back in) and the vibes magically went away

**tsconver** · 03-17-2009, 11:20 PM

Quote:

Originally Posted by gatorayde

No TC yolk swap? No vibes either? Mine had vibes for a while until I re-installed it (had it out for a few weeks, was bad winter so I put it back in) and the vibes magically went away

mounts right to the old flange on the tc and already had a 1310 at the diff

hokies98zj · 03-17-2009, 11:32 PM

this thread sucks.im waiting on my rear driveshaft to come in before i get my jeep back...

MeWJWifeZJ · 03-18-2009, 09:36 AM

Dare I ask what that shaft cost? I'll probably end up getting a factory U-joint shaft and use my flanges from the aftermarket POS that was in my WJ when I bought it so I don't have to swap Tcase and Diff flanges.

hokies98zj · 03-18-2009, 11:42 AM

http://www.4xshaft.com/GrandCherokee.html

thats a link to tom wood's site

**tsconver** · 03-18-2009, 11:56 AM

about $220 delivered. I did not need any yokes as it was already a 1310 joint at teh dif and the driveshaft cv joint was made to bolt right to the existing rezeepa flange on the TC. Took 30 minutes to install, probably 4 hours this weekend to get the angles adjusted correctly though, lol.

Greengc4x4 · 03-18-2009, 12:01 PM

Quote:

Originally Posted by tsconver

about $220 delivered. I did not need any yokes as it was already a 1310 joint at teh dif and the driveshaft cv joint was made to bolt right to the existing rezeepa flange on the TC. Took 30 minutes to install, probably 4 hours this weekend to get the angles adjusted correctly though, lol.

Where did you order it from? Is that 220 WITH the flange adapter?

**tsconver** · 03-18-2009, 12:19 PM

Quote:

Originally Posted by greengc4x4

Where did you order it from? Is that 220 WITH the flange adapter?

Carolina Driveshaft and yes that was complete, the double cardan was made to bolt right tothe tc flange for the stock rezeepa

hokies98zj · 03-18-2009, 01:11 PM

he does live in NC so it will be a little more for you than 220 but i think thats cheaper than tom woods.they have a good rep?i havent heard much about them

**StrokedWJ** · 03-18-2009, 01:58 PM

Yeah, Carolina Driveline is a good company. They're getting their name out there and becoming more popular with jeepers. Very nice job on creating the rear yoke to bolt right up to the stock TC yoke, I wish that had been an option when I ordered mine from them...

**tsconver** · 03-18-2009, 02:09 PM

Quote:

Originally Posted by YHC2000WJ

Yeah, Carolina Driveline is a good company. They're getting their name out there and becoming more popular with jeepers. Very nice job on creating the rear yoke to bolt right up to the stock TC yoke, I wish that had been an option when I ordered mine from them...

I think it depends on if you have a 6 bolt or an 8 bolt TC flange. The 6 bolt can mate toteh DC I used. If you had an 8 bolt flange then the flange has to be swapped out.

**HighLonesome** · 03-18-2009, 02:13 PM

I'm buying one, thanks much. I pulled my front DS shaft last nite and it solved a crazy noise I had. The DC ball is shot along with the slipjoint.

asessa · 03-18-2009, 02:39 PM

Pulled mine out too. Sending in tomorrow. Thanks for the pics, that sealed the deal for me.

**HighLonesome** · 03-19-2009, 10:33 AM

Mine ships tomorrow!