Just wondering. I am about to put a budget lift on my jeep so I went around measuring heights of all my ground to wheel well clearances. they averaged between 31 1/8th to 31 7/8ths on the two fronts and rear passenger side. But the rear drivers side is 32 1/2" from ground to bottom of wheel well.. Is this normal? I have brand new tires with the right pressure and a all 4 new monroe matics shocks on it.. I'm no mac, but I like tinkering with vehicles and I'm new to jeeps. Also ground clearance from ground to the bottom of my jeep is around 14" on one side and 14 1/2" on the other.. Maybe its not a big deal just weird that every theing measures differently. Thanks, Aaron
09-13-2013 07:06 PM
Measure from the center of the wheel to the fender lip and report back.
09-13-2013 07:08 PM
If the jeep was not sitting on flat level ground then such differences can be expected.