I mean I see u going in deep stuff did u relocate trans vent to avoid water in it
That pic actually isnt mine, I dont usually ford anything past my doors (got a nice stereo system an dont wanna short it) I just relocated it so that I wont have to worry about the intake being quite so low.
[SIZE="3"]95 FiveTwo ZJ, DD, Lifted, Locked on 35s, [URL="http://alturl.com/d6vk7"][B][COLOR="Blue"]Build[/COLOR][/B][/URL] (in progress)[/SIZE]
[URL="http://alturl.com/22263"][COLOR="Blue"]My 5.9 swap[/COLOR] (in progress)[/URL]
[URL="http://alturl.com/x4ryd"][COLOR="Blue"]Want your zj to be doorless in 60 seconds?[/COLOR][/URL]
i thought about and weighed my options... i chose to build a snorkel...
4.7 stroker, the inlet for the crank breather and this is before i did the trans/tcase breather, and the diff tube also now has a check valve on it
You NEED to relocate the trans vent
It's behind the torque converter
I plugged mine and added a vent behind the bell housing
Hey, sorry to resurrect a semi-dead thread, did you put that hole in there with the trans disassembled? (just curious where the metal shavings went) Always wanted to water proof things, but *that* was one I didn't even think of...