since the zj is down for right now i put my stereo in the yj today so i got some tunes while driving
1994 yj stretched, locked and loaded - 6.0l vortec lq4, 4l60e, np231, Dana 44s 37" interco trxus m/t, 3.5" bds front leafs, double triangulated 4 link rear on xj front coils.
1997 ZJ limited - BONE stock
2003 tj - 4in skyjacker, 33" mickey thompsons
my on board alternator/welder write up
my tj 1/2 doors on a yj write up
RC vs BDS
I started installing the TJ flares in the front and gashed my fingers open pretty good. Good thing I had napkins and electrical tape lol Only did one side as I was running late for going out to dinner. Should be able to finish it up after work today. I mounted it as high and as far forward as I could go, was able to cut about an inch of metal out from where I was hitting before.
I think I did a good job, just have to trim the over hang in the front and get the blinker housings
89 Wrangler-3.5" HD BDS lift,M.O.R.E HD 5/8" booms on 35" KM2s
99 Cherokee-2 door,5" lift on 35" KM2s
04 Grand Cherokee Overland
72 Chevy Nova-in progress http://tiny.cc/BRASSBALLSOFFROAD
Finally got my trans rebuilt for the second time after some second thoughts on part choices. First time around I just had some stock replacement parts in there. Second time around, I have Kevlar bands, Transpro stage 2 shift kit and a high stall converter. Should be a runner now!
yanked the radiator out to resolder the brackets, found out that our department ran out of funding so can't fill up the oxy/ace tanks which are empty took it to a guy I know so he can pressure test it too. New water pump new flexi hoses, those things are freakin awesome.
That's about it spent most of my time setting up the shop for an acid bomb doing some summer cleaning.
▀||||▀ USAF-Pararescue (2001-2007)
R+D Engineer on hiatus
[quote=CDW_327;15692794]Finally got my trans rebuilt for the second time after some second thoughts on part choices. First time around I just had some stock replacement parts in there. Second time around, I have Kevlar bands, Transpro stage 2 shift kit and a high stall converter. Should be a runner now!
Do you have a write up or detailed info on this. Very interested and is that TF999?