Ok so the wheel hop is getting worse or more frequent any way . Front wheel hop or DEATH WOBBLE . Usually happens at about 45 mph in a sweeping left hand turn , has happened in a right turn also. 1 year old unit bearings , no slop when shaken by hand , same as ball joints . , Tie rod ends seem fine . Lug nuts tight , u bolts tight . No "missing " wheel weights. Shocks & steering stabilizer good . Perches were rolled Ithink 2' when axel was rebuilt , no issues for past 11 months . Found some slop in the steering box when I move the linkage by hand , but seams as it would be expected . Checked tire pressure was ok . Rotated tires any way. Did finde it was towed out about 3/8" , with 35'" tires . Reset to in 1/16" . Havent driven it much since , maybe that was it ?
I am at my whits end any help would be greatly appreciated !
Got a lot done in the past few days. First my new bikini top came in the mail tuesday.
Thursday i got my hi-lift mounted on my hood.
Got my new LED Mag Lite mounted Saturday.
Got my new extinguisher and mount in saturday also.
Then i threw the new bikini on and went cruising this evening,so i snapped a random poser shot.
Lets see. installed a melling high volume oil pump, replaced the rear main seal, cleaned up the inside of the dizzy, cut the front fenders, clearanced the rear disc brakes, helped the roommate stretch the rear on the JK() 3.5".
Tomorrow is another day.
89 YJ.. My first jeep and I won't let it go. ▀||||▀
Current Project: None... I disgust myself.
[URL="http://www.jeepforum.com/forum/f22/my-yj-build-adventures-thread-1356941/"][SIZE="3"][B]BUILDING THE YJ MY WAY[/B][/SIZE][/URL]
bought a grease gun and went to town on the zerks
adjusted the belt to stop the squeaking. tensioner broke so pry bar and a helper sufficed.
found the cause of the clunking noise on hard accel / droping the clutch.
the old u joint needel bearings has turned to dust...lol new one went in without a hitch
all in all a good day for the yj
tonmoro to the jy to search for usable things woo!!
Got the Dana 30 back under the rig, new OME 36r's & new shocks Still waiting for the Rusty's steering kit. Today I'll get the axle built up & route the OX cable. Finaly a brake from the heat! 96 never felt so cool!