Let this thread be an inspiration to all of us doing mods, maintenance, or repairs. :thumbsup:
I'll start it off, over the holiday weekend, I did an oil and filter change, fixed a couple rattles, did the front brakes (new rotors and pads), and swapped the brake fluid.
11-28-2005 04:48 AM
yesterday i got the YJ dirty ..... i think she was happy :)
11-28-2005 05:52 AM
i sewed up the gaping hole in my soft top with fishing line in preparation for winter. then cut off the busted *** exhaust pipe from the muffler back and welded on a 90° turn down...keeps the fumes out even with a few drain plugs missing lol. one of my u-joints is fixing to give out, i should probably fix that next before i catapult my jeep on the highway. :laugh:
11-28-2005 06:50 AM
I let mine play in the sand!
11-28-2005 06:56 AM
This weekend I replaced all the brake hardware and pads on the right rear, fixed my parking brake, checked trans fluid level (was fine), checked Xfer case fluid level (needed about 1/2-2/3 Qt.), changed air filter, fixed a vacuum leak, tried adjusting my choke linkage so the choke works (failed), and installed a cheapo CD player so I can have some tunes.
11-28-2005 07:31 AM
I built a drawer for the back of the jeep that I can keep my tools, booster cables, straps, chains, comealong, and all my other crap in and still keep the back of the jeep looking fairly clean. It came out reallly nice and I like it alot already.
11-28-2005 07:43 AM
This weekend I started replacing the fender flares with new brushwacker style flares :D Today I will finish the job...and install my quick discos!
11-28-2005 08:15 AM
Got mine back from the mechanic, drove it around and blew the slave cylinder AGAIN... 5th one...
Still no clue whats causing this.
11-28-2005 08:24 AM
took mine to the mechanic :(
11-28-2005 09:15 AM
I repaired a smashed rear passenger side lower shock mount. Landed that bad boy on a big rock, looked like a crumpled beer can. Been driving for 4 weeks with a shock & mount zipped tied up and out of the way. A little heat, hammer, weld, and some paint; it's good as new. Oh, and new U-bolts while I was there.
11-28-2005 09:25 AM
not today, but on Thanksgiving we woke up to 3" of snow - I took mine out for some "donuts" :)