[Brandon_YJ]

and I just can't seem to put my finger on it.

http://detroit.craigslist.org/car/555546045.html

[Michael_94YJ]

am i missing something?

[NewhampshireYJ]

CJ7......Yj..... Pretty funny but hard to understand why he called it a cj7 when all that works been done to it.....

[Michael_94YJ]

Originally Posted by NewhampshireYJ

CJ7......Yj..... Pretty funny but hard to understand why he called it a cj7 when all that works been done to it.....

probably cause it's got cj running gear? 304, T-18, dana 300...

[HighTimes4X4]

I don't think you would be able to get it to pass emissions here in Colorado. They are not to hip about swapping older motors into vehickes especially taking a fuel injected rig and putting a carbed motor in

[1995_4.5L Jeep]

Originally Posted by HighTimes4X4

I don't think you would be able to get it to pass emissions here in Colorado. They are not to hip about swapping older motors into vehickes especially taking a fuel injected rig and putting a carbed motor in

No more emissions test in Colorado Springs.

[The Rat]

I don't see what's wrong with it either? It's a Wrangler with a CJ7 drivetrain...including the axles, by the looks of it (manual hubs on the front, no mention of a flip kit for the D300, the rear shown looks like an AMC20).

[HighTimes4X4]

it might have a passenger side diff axle up front, hard to tell in the pic. doesn't look too bad for the price as long as everything was done right, you just never know what you are getting into when someone else has already done the work.

[Brandon_YJ]

I just thought the title "92 Wrangler CJ7" was a bit on the funny side.
I'm actually going to go take a look-see at it this weekend.