[shaneboy87]

i went along with the nutter bypass with the instructions from http://www.4x4wire.com/jeep/tech/electrical/jn-ignition99/ i followed the instructions to a tee, and when i went to start it, it was getting no spark. not even a sign of any spark, the i realized that my coil was not grounded. so i then grounded it and when i went to start it the positive wire of the coil (ignition wire) burnt up. so i put everything back together and it started again. sooo i want to beable to go along with this bypass because my jeep runs like a 2cyl bolens tracktor. any help would be awesome, thanx, shane

[sandman'sjeep]

what's a gangster lift....

[shaneboy87]

lol my gangster lift is basically some retardedly huge shackles from Auto Zone, haha, its getting fixed asap, its scary to drive with. its enough of a lift to run 33's somfterbly, but i need help with my sweet ignition. ill let you know when the lift is gangster in the right way.

[Wif]

so it's more of a hold-up than a lift .. truly gangster ..

have a look at:

http://www.jeepforum.com/forum/f12/88-yj-problems-204255/?highlight=nutter

reply #7 explains how I did my nutter .. did you do yours like this ??

[atomicmoose]

Also, you may want to reference this: http://home.sprynet.com/~dale02/ignmods.htm#diagram

It is a bit more clear (to me) than the 4x4wire.com writeup.

[ScotZ]

Originally Posted by 88Jeepster

so it's more of a hold-up than a lift .. truly gangster ..

have a look at:

http://www.jeepforum.com/forum/f12/88-yj-problems-204255/?highlight=nutter

reply #7 explains how I did my nutter .. did you do yours like this ??

Toooooooooo Funny

[shaneboy87]

thanx guys, but i think that my coil is the problem, theres 3 wires and only 2 are hooked up, and its still running. so i dont know if i need a new coil or what. a diagram would be awesome. thanx.