Does anyone know of a thread or a write up that has some kind of insight into converting manual steering to Power. I have purchased everything I need except the belt. I was just looking for any heads up I can about this project. I bought a whole power steering system froma guy on ebay off of a 92 yj (resevoir, pump, hoses, steering box with attached pitman.) Is there a difference between I6 power steering and 2.5 Liter power steering?
I think my jeep stats are there but if not
1994 yj (s) 2.5 liter 5spd.
2002 WJ laredo 4.0 Quadratrack II
I don't know what an I6 power steering pump looks like. If it looks like this one, it won't work beacuse of your fuel injection will get in the way. I did the power steering conversion last year. It is well worth it no matter what it will cost you.
White '94 YJ 2.5L 5 speed, 35" BFGs KM2's, 5" lift, Mark VII 2 speed fan, Milemarker PE8000, Front Aussie Locker, Power steering conversion, '98 Cavalier seats, MORE Boomerangs in front, 136 amp ZJ alternator, JB conversions SYE, Tom Woods custom drive shaft, 8.8 with ARB, 4.88 gear ratio, Teralow
I did it on my 92 2.5. not sure but i think I used the power steering pump from a 4.0. ended up taking the pump off of a friends 4.0 to use as a template to make a new bracket. It can be done... just stay the course and will be turning with one finger soon....