Last weekend I swapped motors due to me blowing up my first 4.0 with a 4.0 from a 99 cherokee. Now after driving around for a week I am getting some really bad vibes from what sounds to be in the bellhousing.
I used a new pilot bearing, but there was a sleeve that the bearing fit into that also had to be switched over from the old engine.
I'm not sure if it could be in the clutch assembly or if it has to do with the pilot bearing>>??
Any ideas. Thanks.
Mike
I used a new pilot bearing, but there was a sleeve that the bearing fit into that also had to be switched over from the old engine.
I'm not sure if it could be in the clutch assembly or if it has to do with the pilot bearing>>??
Any ideas. Thanks.
Mike