Finishing up on the parts list for the wifes 87' YJ motor swap. I know this topic has been wrote about/talked about/sung about, but I was more wondering about any advice from those who have done the swap recently and discovered "NEW" technology that would have made the swap easier. I have obtained the following so far:
94' 302 roller complete from mustang(@60K)complete w/wiring $400.00
92' AX-15 w/231 transfer case $100 complete
Summit motor mounts
Need to get bellhousing from ford truck w/slave cylinder, fuel pump/filter, and prolly a
few other loose ends that will come up.
Thanks for any information ...should be starting next weekend!