Jeep Enthusiast Forums banner

87 Wrangler.. 4L swap.. keep tranny?

582 views 6 replies 4 participants last post by  76_iron 
#1 ·
Guys.. I have an 87 Wrangler.... which as you know has the BA10 tranny... if I get a 4L out of a cherokee with an auto attached to it... Can I connect that to my ba10... I know I want to swap that out too.. but I might only have time and $$ to do the engine first.. and I found a great deal on a rebuilt one.

Thanks
Kyle
 
#2 ·
Not ideal but you can if you figure out how to mount the cps if you are going fuel injected, don't forget to use a 4.0 flywheel for the crank trigger.

Dwayne
 
#4 ·
It will bolt right up, the ba10 on my 88 YJ was already cut out for a cps, and the flywheel was set up for a cps also. BA10 was used in cherokees and commanches with the 4.0, the one in my 89 commanche has around 200k on it. It will live until you can swap it out if you don't have big tires or beat on it.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top