Jeep Enthusiast Forums banner

XJ Rebuild...need electrical help!

653 views 0 replies 1 participant last post by  mtbikemarc 
#1 ·
OK, so the body on my '93 XJ was cracked, so I got a body from a '91 and am putting the guts from the '93 into it. I'm pretty far along and everything has fit...except when I'm plugging electrical stuff in the engine compartment. I have a bunch of ends just hanging out in the breeze w/ no partner to fit into.
My questions are:
Does anyone know of any compatibility issues with the '93's guts being put in a '91 body (using the '91's electrical, only took the engine, tranny, t-case, etc from the '93)?
Does anyone have any good pictures under their hoods so I can see what it's supposed to look like?
Anyone with anything useful to say will be warmly welcomed.
I will be much more detailed and can provide pics when asked.
THANKS!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top