Jeep Enthusiast Forums banner

PCM Installation???

1K views 1 reply 2 participants last post by  BlkBird 
#1 ·
Can anyone give me a few heads ups or a tip before I plug in a used Powertrain Control Module into my 95 Cherokee 4.0 Lit.? Thank you
 
#2 ·
Im not sure how much changed but on my '00 it was as simple as it looks. Undo the batt. cable, remove harness from PCM, remove 4 screws that hold it to the inner fender, do the opposite to install.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top